LCR Meter TH2826A is a new generation impedance test instrument and firstly in conformity with LXI standard inland. It fulfills most low-voltage parameter measurement needs for components and materials with its basic accuracy (0.1%), wide frequency range(from 20Hz to 2MHz). The instrument is widely applied in microphone,resonator, inductor, ceramic capacitor, LCD, varactor and transformer .etc to analyze electrical performance and test low-ESR capacitor and high-Q inductor. With the super high test speed, TH2826A is especially for frequency response curve analyzing of detector and piezoelectric device on auto production line. Its multiple output impedance mode can be used for different standards of inductor or transformer manufacturers. With its prominent performance, TH2826A is in conformity with commercial and military standards, such as IEC and MIL standards.
Specification Parameters C, L, R,Z,Y,X,B, G, D, Q, θ,DCR Test frequency: TH2826A 20Hz–2MHz,with the resolution of 10mHz Test Level: f≤1MHz 10mV–5V,±(10%+10mV);f>1MHz 10mV–1V,±(20%+10mV) Output impedance: 10Ω, 30Ω, 50Ω, 100Ω Basic Accuracy: 0.1% Display Range: L 0.0001 uH – 9.9999kH C 0.0001 pF – 9.9999F R,X,Z,DCR 0.0001 Ω – 99.999 MΩ Y, B, G 0.0001 nS – 99.999 S D 0.0001 – 9.9999 Q 0.0001 – 99999 θ -179.99° – 179.99° Measuring SpeedFast: 200(f>30KHz),100(f>1KHz);Med: 25, Slow: 5 Calibration function: Open/Shot /load Equivalent mode: Serial, Parallel Ranging Mode: Auto and Hold Display Mode: Direct, ABS, Rel Trigger Mode: Internal,Manual,External,BUS Internal DC bias source Voltage mode:-5V – +5V,±(10%+10mV), with the resolution of 1mV Current mode:100mA – +100mA, ±(10%+0.2mA),with the resolution of 20uA Comparator function: 10 bins and bin counters Display: 320×240 dot-matrix LCD display Memory: 20 groups of control settings can be saved Interface: USBDEVICE( USBTMC and USBCDC support),USBHOST(FAT16 and FAT32 support),LAN(LXI class C support),RS232C,HANDLER,GPIB(option)